Martin MAC Viper AirFX Manuale Utente Scaricare il pdf

Martin MAC Viper Quadray™ Quadray Installation and DMX Control Guide 1

MAC Viper Quadray™ Module

Installation and Control Guide

Introduction

This Guide explains how to install the Martin MAC Viper Quadray™ Module, P/N 91614052, on a Martin MAC

Viper AirFX™ fixture and control the Quadray functions via DMX.

Installation takes only a few minutes. If you keep the standard components you remove when you install the

Quadray module, the Quadray components can be uninstalled and the fixture returned to standard configuration

at any time.

Warning! Follow all the safety precautions in the MAC Viper AirFX user manual and use the

manual for reference when installing the Quadray Module and using the modified product. The

user manual is supplied with fixtures, but check that you have the latest revision of the user

manual. This is available for download from the Product Support page for the MAC Viper AirFX

at www.martin.com

Warning! Disconnect the fixture from power and allow to cool for at least 2 hours and 45

minutes before starting work.

Warning! The Quadray Module must be installed by qualified professional technicians only.

Read all of this Installation Guide carefully before starting to install the module.

Important! Make sure that the front of the head does not face the sun or any other strong light

source directly for longer than a few seconds at any time. Lenses can focus the sun's rays

inside the fixture, causing internal damage and creating a possible fire risk

Important! Do not use concentrated alcohol solutions, abrasive products or solvents to clean

the components in the Quadray Module. If wiping with a soft, lint-free cloth dampened with

distilled water is not effective, damp the cloth with distilled water containing 20% isopropyl

alcohol in solution.

If you have any questions about how to install the Quadray Module or use it safely, please contact your local

Martin distributor (see www.martin.com/distributors for details) or call the Martin 24-hour service hotline on +45

8740 0000, or in the USA on 1-888-tech-180.

Software compatibility

MAC Viper AirFX firmware version 1.2.0 or later is required for operation with the Quadray Module. The latest

version of the MAC Viper AirFX firmware is available for download from the MAC Viper AirFX Product Support

page on the Martin™ website at www.martin.com

Professional A/S and all affiliated companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic

loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this installation note. The

Martin logo, the Martin name and all other trademarks in this document pertaining to services or products by Martin Professional A/S or

its affiliates and subsidiaries are trademarks owned or licensed by Martin Professional A/S or its affiliates or subsidiaries.

P/N 35000629 Rev. C

1 2 3 4 5 6 7 8

Sommario

Pagina 1 - MAC Viper Quadray™ Module

Martin MAC Viper Quadray™ Quadray Installation and DMX Control Guide 1MAC Viper Quadray™ ModuleInstallation and Control GuideIntroductionThis Guide e

Pagina 2 - Installation procedure

2 Martin MAC Viper Quadray™ Module Installation and DMX Control GuidePreparationThe Quadray Module accessory contains the following items:• MAC Viper

Pagina 3 - Figure 5

Martin MAC Viper Quadray™ Quadray Installation and DMX Control Guide 35. See Figure 3. Line up the Quadray Module over the head so that the module’s

Pagina 4 - Figure 7

4 Martin MAC Viper Quadray™ Module Installation and DMX Control Guide9. See Figure 6. Gather up a loop in the Quadray Module wireset and push it into

Pagina 5 - Quadray control

Martin MAC Viper Quadray™ Quadray Installation and DMX Control Guide 5Quadray controlWith the Quadray Module installed and the fixture running firmwa

Pagina 6 - Quadray FX

6 Martin MAC Viper Quadray™ Module Installation and DMX Control Guide*These functions become available if you select one of the pre-programmed FX on

Pagina 7

Martin MAC Viper Quadray™ Quadray Installation and DMX Control Guide 7131132133134135136137138139140141142143144145146147148149150151152153154 - 1591

Pagina 8

Martin Professional A/S • Olof Palmes Allé 18 • 8200 Aarhus N • DenmarkTel: +45 8740 0000 • Fax +45 8740 0010 • www.martin.com

Più documenti per Proiettori Martin MAC Viper AirFX

Per vedere il documento Martin MAC Viper AirFX Guida Utente

Martin MAC Viper AirFX Guida Utente (69 pagine)

Martin MAC Viper AirFX Guida Utente (35 pagine)

Commenti su questo manuale

Nessun commento

Martin MAC Viper AirFX Manuale Utente

Navigare online o scaricare Manuale Utente per Proiettori Martin MAC Viper AirFX. Martin MAC Viper AirFX User manual [en] Manuale Utente

Sommario

Più documenti per Proiettori Martin MAC Viper AirFX

Commenti su questo manuale

Prodotti e manuali riguardandi Proiettori Martin MAC Viper AirFX