Martin smartMAC Manuale Utente Pagina 44
- Pagina / 56
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
44 smartMAC user manual
Disable DMX lamp off command
Enable DMX lamp off command
Disable reset via DMX
Enable reset via DMX
Enable reset via DMX when reset command is held for 5 seconds
No automatic lamp strike
Lamp strikes automatically within 90 seconds of power on
Lamp strikes if DMX signal is present, powers off again after 15
minutes if no DMX signal is received.
Effect wheels do not cross open
Effect wheels move shortest distance (even if this means
crossing open position)
Lamp life warnings off
Lamp life warnings on, lamp shuts down when expected lamp life
has been reached
Set expected lamp life in hours
Normal mode: pan, tilt and effects set to normal speed
‘Silent’ mode: pan, tilt and effects set to slow speed (overrides other
control menu settings)
Display on permanently
Display auto-sleeps and menu returns to top level after 2 mins.
Display auto-sleeps and menu returns to top level after 10 mins.
Display auto-sleeps and menu returns to top level after 2 mins.,
display is reactivated by error messages
Display auto-sleeps and menu returns to top level after 10 mins.,
display is reactivated by error messages
Display intensity 100% - 10% (default = 50%)
Disable message display if an error is detected
Enable message display if an error is detected
Return all settings (except calibrations) to factory defaults
NB: can take up to 2 minutes to complete!
,,
Load custom configuration
Save current custom configuration
Reset all resettable counters
Æ
Total hours of operation since manufacture
Hours of operation since counter reset (to reset counter, display
counter and press [Up] for 5 secs.)
Æ
Total hours of operation since manufacture
Hours of operation since counter reset (to reset counter, display
counter and press [Up] for 5 secs.)
Expected lamp life value (default = 3000 hours, can be reset in
Æ menu)
Total number of lamp strikes since manufacture
Number of lamp strikes since counter reset (to reset counter,
display counter and press [Up] for 5 secs.)
Head temperature
PCB temperature
CPU firmware version
DMX transmission speed in packets per second
Percent of packets received without errors
Decimal value of the DMX start code
– DMX value (0 - 255) received on each channel
Menu Item Options Notes (Default settings in bold print)
Table 5: Control menu
- Dimensions 2
- Safety Information 3
- LAMP SAFETY 4
- Contents 5
- 6 smartMAC user manual 6
- Introduction 7
- 8 smartMAC user manual 8
- AC power 9
- Power cable 10
- Power plug 10
- Applying power 10
- About the lamp 11
- Lamp replacement 11
- Lamp adjustment 12
- Data link 13
- Physical installation 14
- Physical installation 15 15
- 16 smartMAC user manual 16
- Setup 17 17
- DMX address and protocol 18
- Tailoring performance 18
- Readouts 19
- Manual control 20
- Service utilities 20
- Calibrating effects 21
- LED indicators 21
- Effects 23 23
- DMX operation 24
- Personality overrides 25
- Stand-alone operation 26
- Stand-alone operation 27 27
- 28 smartMAC user manual 28
- Service and maintenance 29
- Coated Glass Gobos 30
- Textured Glass Gobos 30
- Metal Gobos 30
- Image / text Gobos 30
- Effects access hatch 31
- Changing gobos and filters 31
- Replacing rotating gobos 32
- Service and maintenance 33 33
- Cleaning 34
- Lubrication 34
- Fuse replacement 34
- Firmware installation 35
- Circuit board layout 36
- DMX protocol 37
- Table 4: DMX Protocol 40
- Control menu 43
- Table 5: Control menu 44
- Control panel shortcuts 46
- Adjustment submenu 47
- Display messages 48
- Table 6: Display messages 49
- Troubleshooting 50
- Specifications 51
- 52 smartMAC user manual 52
- • Fax +45 8740 0010 56
Prodotti e manuali riguardandi Luci da discoteca e stroboscopiche Martin smartMAC
(36 pagine)© 2020, manymanuals.it. Tutti i diritti riservati | 0.146 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale